Topic: Car Tek Complaint !
Yupp Got Mid Engine Sand rail all fired up got it in all 4 Gear's and R But wouldnt Move ??
Further inspection revealed the CNC splined Hubb was stripeed out on the rear Disc brake set up !
At first I just pulled the one badd side that was obviously Wobblin and Nut was loose ! Previous owner used a stock Nut ???/ Wrong !!!
But called Car Tek up in Corona Ca. asked if I could just but the Hubb by itself and if so do you have it in stock ???
Sure enough Guy told no problem ! So next Question was How Much !!
Car Tek Guy said 100 to a 150 Buck's !! Hell yeah !! Damm that's cheap !!
So with out regard to In God we trust we Hauled arse down there the 40 to 50 miles were going Dune-ing this week end !!
Got Down there only had the long spline Hubb and wanted 300+ Buck's per Hub !! THe complete Sett is 750 !
Guy had no short spline Hubb's in stock But we could Turn it down to work on the short spline !
But at twice the Price were thinkin OK Need to check the other side determine if were gonna JUst Buy 1 Hub or whole new sett ! That and between me and Pop's we only had like 200 buck's on us cause we were told 100 to a 150 on the phone !
So cruised on back Home Pulled other side it wasnt in the best of Shape so we thought Ok now we just need to go with completely new Sett ! Best Bett !
2 Duneing week end's later with all our research done and a Healthy new respect for in God We trust we call down there and Guy Say's yeah got it in stock but it's long spline but that's not a Problem 1/2 hour I can turn it down for you !
OK we get down there !! Guy wait's on us is Hispanic ??? While waitin on us another Hispanic Customer behind us start's askin question's about His Part , problem !!
Im easy ! Guy need's Help !! Rude Lil S.O.B. but a certain amount is tolerable ?? 15 Minutes Car Tek Guy cant even get are Chitt out of the Box etc. For talkin with this Runt !!
Hard Mean look's arent workin ????? Still warblin on with each other in Spanish ! Im Pssd but holdin cause I really Really wanted to Dune this week end !!
Finally Car Tek Guy turns to us ! We Figure out the Upgrade decide not to go this way ! So we go with the other but it need's to be turned Down for small spline !!
Car Tek Guy still back and forth with knot head in Spanish thru it all !!
So He ask what to turn it down for !!
Short spline T-1 swing arm axle I tell um !! Then want's to know if I brought other stripped one with me so He can measure it !!
Dont need the old one its stripped and ate up cant measure it to tell what it need's to be Cut at from the Old one !
Then tell's me theres 3 different axle lenght's !
Yes But only 2 Different Hubb's are used !
So then He argues well what lenght do you want me to Cut it Too ???
( Ok I KNow But Ive allready figured out He Doesnt Know and Im thinkin I dont want Zorro cuttin it )
So I ask dont you have a V.W. expert in here can tell you ????? Or ??
Then other Car Tek Guy Pop's in and Say's we Cut it you bought it ???? Even if it's Cut wrong !!!
I started in on them Big Time ! Runt Boy He Disapeared !! Good thing too ! Cause Im thinkin about throwin his punk arse over the counter intoo a wall ! As in Audi Ouis Amigo !!
Pop's Just being Quiet look's um both Dead in the Eye say's Blank you !Then Walked out !
20 miles down the Freeway to Mc Kinnley's Raceing in Anaheim !! 5 Minutes and were hooked the Blank up !! Pickin the complete sett up Tuesday ready to install on the Car !!
Could have had it sooner But cant get back down there untill Tuesday or Wednesday !
Gotta LOve a White Boy whose got His Chitt together !! These Guy's Do ! No question's on what Lenght it need's to be !! They allready Know !! etc. etc.
they do actuall work on Bugg's and Truck's in the Back to go Raceing etc. etc.
As to the Non English Mexican's get Preferential treatment over white Boy's B.S.
Im all for it there Essay !! Lett's see who Winn's out in the Long Runn !!
Mexican's can wait and do Bussiness with only Mexican's !!
Then us white Boy's will do the Same !! See who know's are Chitt the best ????? LMAO
Sean